Termites are known for their goodness in the ecosystem but also for the destruction they can cause on property. Most victims of termite destruction are hardwood floors. When a hardwood floor is fixed properly, during fresh construction or when refinishing, it is highly unlikely that you will need termite control services later on. This article will help you prevent risks of damage to your hardwood floors by termites.
The top step in refinishing hardwood floors involves observing the floor and paying more attention to the gaps between the floor planks. The intention for carrying out the observation is to uncover any pests such as termite control that are known for damaging hardwood floors. You can notify a termite control expert if you find any signs of termites. While observing, you will be able to tell the kind of floor you are working on. While some floors like oak and pine are easier to work with, others, like mahogany and maple are more complex. You can then start refinishing your hardwood floor when you are sure that there are no termites and that you can handle the particular type of hardwood floor.
The next important termite control procedure in refinishing hardwood floors is conducting an adhesion test. Begin by selecting a small area where you will carry out the adhesion test. You should begin by cleaning the area of floor that you are dealing with using a floor cleaner. Sanding the clean area with a sanding screen and removing the extra residue is the next thing that you should do. The dust-free area is then ready for the application of a coat of polyurethane. You should wait for about twenty-four hours to elapse before checking on the area. The area should be smooth apart from a few whiskers caused by dust. You can then press down on the surface using medium and even pressure to confirm that the solution will adhere properly.
After the above step, bring together the materials that are essential for termite control your floors. Among the crucial equipment for carrying out floor refinishing are industrial set vacuum cleaner, breathing protection, hearing protection, safety glasses, work gloves, polyurethane floor sealant, painter’s tape, box fan, power floor buffer, nail set, wide-blade dull putty knife, pliers, hammer and edge sander. You can either borrow these items from a neighbor or buy from a home improvement store or online shop.
The steps that follow then include cleaning your floor, buffer it and then add the floor finish. Cleaning helps the floor to come out flawless. You should change the surface of the sanding screen facing the floor after ten to fifteen minutes because after that it will lose its sanding capability. After buffering the floor, you should ensure that you get rid of any dust prior to doing the finish. The easiest floor finish option to use is polyurethane.